Posted on Leave a comment

All Ice Maker Repair Referral

Call 6019690004 for Ice Machine Service in Jackson MS. Service on KitchenAid, Whirlpool, GE, Monogram, Electrolux, Marvel, Scotsman, Sub Zero, Viking, Danby, Maxx Ice.

Ice_Machine_Repair in Mississippi
In Home Service on Built In Ice Machine Brands KitchenAid, Whirlpool, GE, Monogram, Electrolux, Marvel, Scotsman, Sub Zero, Viking, Danby, Maxx Ice.

Refrigerator Ice Maker repair on All brands Whirlpool brands include KitchenAid, Maytag, Jenn Air, Admiral, Amana, Roper, Estate, Inglis, Ikea, Whirlpool.GE brands include GE, Hotpoint, RCA, General Electric, GE Monogram. Electrolux brands include Frigidaire, Gibson, White Westinghouse, Icon, Electrolux, Universal. Sears Kenmore, L-G, Samsung, Haier, Crosley.

Request Appliance Service Company for ice machine service

ABCO AIR & APPLIANCE 601-573-5853

ACE AIR & APPLIANCE 601-573-6497

We have the parts, they have the know how.

 

DIY Ice maker Service Help

1.In a Refrigerator it is very important to verify the freezer is below 15 degrees.

2.Is there ice in the ice maker mold?

3.If no look at the water inlet valve.

4.If Yes the problem is in the Ice maker.

5.If you need more help call us at 601-939-2550.

Nickel Safe Cleaners & Cleaning Services Available

Do It Yourself Built in Ice Machine Repair Help

Directions on Cleaning the Ice Machine Nickel Evaporator

You will need to use one 16-ounce (473 mL) bottle of approved ice maker cleaner.  We recommend using the Affresh® Ice Machine Cleaner part number 4396808.

    1. Turn off the ice maker.
    2. Wait 5 to 10 minutes for the ice to fall into the storage bin. Remove all ice from the storage bin.
    3. Unscrew the drain cap from the bottom of the water pan located inside the storage bin as shown. Allow the water to drain completely.
    4. Replace the drain cap securely on the water pan. If the drain cap is loose, water will empty from the water pan and you will have either thin ice or no ice.
    5. Read and follow all handling information on the cleaner bottle before completing the steps below. Use one 16-oz (473 mL) bottle of approved ice maker cleaner.
    6. Pour one bottle of solution into the water pan. Fill the bottle twice with tap water and pour it into the water pan.
    1. Press and hold the “Clean” button. (See the “Using the controls” section below.) The light will blink, indicating that the cleaning cycle is in process. When the indicator light turns green (approximately 70 minutes), the cleaning cycle is complete. During the cleaning cycle, the system will both clean and rinse itself.
    2. After the cleaning cycle is complete, remove the drain cap from the water pan. Look to see if any cleaning solution is left in the water pan. If cleaning solution drains from the water pan, you should run the clean cycle again. Be sure to replace the drain cap securely on the water pan. Otherwise, if the drain cap is loose, water will empty from the water pan and you will have either thin ice or no ice at all.

    NOTE: Severe scale buildup may require repeated cleanings with a fresh quantity of cleaning solution.

    1. Press and hold the “On” button to resume ice production

      Cleaning the Condenser

      A dirty or clogged condenser:

      • Obstructs proper airflow.
      • Reduces ice-making capacity.
      • Causes higher-than-recommended operating temperatures which may lead to component failure.