Posted on Leave a comment

Help Replacing a Universal Fit Air Conditioning Condenser Fan Motor

Help Replacing a Universal Fit Air Conditioning Condenser Fan Motor.
The Motor you choose should be the Same voltage, Same horsepower or greater, Same R.P.M.,Same rotation or bidirectional rotation, and the ability to be mounted the same way your original motor is,shaft up or shaft down,horizontal or vertical.
This illustration applies to the Fasco d7909, d7908, d7907 fan motors

In most cases you will by a motor that uses its own run capacitor,the motor will have 2 wires that go to that capacitor as shown here.
IMG_1111

The motor will have 2 line voltage-in wires normally labeled L1 and L2. These wires will usually attach to the power contactor opposite the line voltage in from the power source as seen here.
contactor-wiring

If the motor is rotating the WRONG DIRECTION the you can REVERSE the rotation by changing the order of the Directional wires, the pictures show a motor with 4 wire,2 yellow joined together and 2 violet joined together, to reverse the rotation on this motor simply unplug the yellow and violet wires and join each yellow wire to a violet wire as shown.
rotation-wires
rotation-wires-1
rotation-wires-2

If your original fan motor used a dual capacitor with the same capacitor rating as the replacement motor, you could use an alternate 3 wire connection as shown here
fasco-dual-cap-3-wire-wiring-diagram